Advanced - Buffalo AirStation WHR-300HP2 User Manual

Advanced

Configure advanced wireless settings here.
Multicast Rate
DTIM Period
Wireless Client Isolation
Output Power (11n/a
only)
Set the communication speed of multicast packets.
Set the beacon responding interval (1 -255) for which the AirStation responds to a
wireless device. This setting is effective only when power management is enabled for
the wireless device.
If enabled, the wireless client isolation blocks communication between wireless devices
connected to the AirStation. Wireless devices will be able to connect to the Internet
but not with each other. Devices that are connected to the AirStation with wired
connections will still be able to connect to wireless devices normally.
This sets the output of the wireless signal. Because the wireless transmission output and
signal distance range are nearly proportional, when the wireless transmission output is
reduced, the signal distance range also becomes shorter.
27