Technical Specifications - Strong SRT 2021 User Manual

Problem
No menu or signal from the
Android IP Box on the TV
No internet connection/
activities
Some HDTVs cannot display
the entire picture
The IP Box switches off after 3
hours of no commands of the
remote control
Forgotten your PIN code
The external USB HDD does
not start.

8.0 TecHnicAL sPecificATiOns

Video decoder
Aspect ratio:
Video resolution:
*2160p is only presented in the menu when HDMI is connected to a 4K UHD TV (HDMI cable of good quality advised).
16
Possible reason
Wrong input on the TV
The connections are not done
properly.
The quality of the connected
cables is insufficient.
The power saving Auto
standby function is activated
Default PIN is 1234
The power consumption is
too high.
16:9, Auto/Full screen
2160p*, 1080p, 1080i, 720p
Remedy
Check whether the correct HDMI
input on your HDTV is selected.
Ensure that the connections are
done correctly and are fitting
well to the connected input/
output.
Check that the quality of all
cables is good. Reconnect all
cables between the IP Box and
the TV set.
Make sure the Wi-Fi network
is connected and the security
key for the encrypted network
is correct.
Make sure you select the
correct IP address settings.
Setup the screen ratio on your
HDTV as automatic or change
the screen size in the system
menu.
Switch the Auto standby
function off, if you don't like it.
Contact your local Service
Hotline or send an email to our
support via www.strong.tv
Connect an extra power supply
adapter to your USB HDD
device.