Appliance settings
en
Q
Appliance settings
Automatic switch-off
A p p l i a n c e s e t t i n g s
If the appliance is not operated for a
prolonged period (approx. 15 minutes),
it may automatically switch off before
the programme starts and when the
programme has ended. Press the
power button # again to switch on the
appliance.
Basic settings
To access the basic settings, touch and
hold the ç button for approx. 3
seconds. The control panel show:
You can change the following basic
settings:
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the drum care information
■
signal on/off.
End signal
Touch and hold the ç button for
approx. 3 seconds. The indicator lamp
in position 1 is on. You can use the +
button to adjust the volume of the end
signal, e.g. ' - ‚.
24
Possible setting values:
0
off
1
quiet
2
medium
3
loud
4
very loud
Button signal
You can touch position 2 and use the +
button to adjust the volume of the
button signal, e.g. › - „.
Possible setting values:
0
off
1
quiet
2
medium
3
loud
4
very loud
Brightness
Possible setting values: 1 - 4
You can touch position 3 and use the +
button to adjust the brightness of the
Touch-Display, e.g. ' - „.
Possible setting values:
1
not very bright
2
normal level of
brightness
3
bright
4
very bright