Advanced - Motorola Buds Get Started Manual

Advanced

more clever stuff
Headset status light
If light shows...
flashing blue
steady blue for three
seconds, then off
flashing red
steady blue, then
fading out
steady red
steady green
Reset headset
To reset default factory settings on your headset, turn
Bluetooth® power off for all connected devices. Turn the
headset on, then press and hold the Call/Play and both
volume buttons until the status light shows alternating red and
blue pulses.
Caution: This feature erases all device pairing information
stored on your headset.
8 Advanced
your headset is...
powered on and searching for a
device
connected to a device
in a low battery state
powering off
attached to charger, battery
charging
attached to charger, battery fully
charged
en