Avital 2101L Installation Manual page 15

button will change the setting to the LED OFF setting.
The LED will go out indicating the change and the horn
will honk twice (if connected).
For example: To program the unlock pulses from single
to double pulse:
1. Turn the ignition On and Off, then within 10seconds,
Press and Release the Valet/Program switch five times.
2. Press the Valet/Program switch again and hold it.
The horn honks five times (if connected) and the LED
flashes in groups of five.
3. While holding the Valet/Program switch Press the
unlock button on the transmitter. The horn honks twice
(if connected) and the LED stops flashing and goes out.
Double pulse unlock is now programmed.
4. To change to single pulse unlock, without releasing
the Valet/Program switch Press the lock button on the
transmitter. The horn (if connected) honks once and the
LED lights solid. Single pulse unlock is now
programmed. Release the Valet/Program switch.
© 2009 Directed Electronics, inc.
4.R R e e l l e e a a s s e e . The Valet®/Program
switch can now be released.
15