Changing The Dust Bag - Siemens VS07 SERIES Instructions For Use Manual

Changing the dust bag

Place a new MEGAfilt
and close the dust bag compartment lid.
Caution: The cover only closes when a
MEGAfilt
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter in the
machine and close the dust compartment cover.
28
SuperTEX dust bag in the holder
®
SuperTEXdust bag has been inserted.
®
en Changing the dust bag
Replacing the micro-hygiene filter
The motor protection filter should be changed when
starting a new pack of bags.
Open the dust bag compartment lid
Unlock the filter holder by pushing the locking tab in
the direction of the arrow.
Remove the foam and micro-hygiene filter.
Place a new micro-hygiene filter and the foam in the
filter holder.
Insert the filter holder back into the vacuum cleaner
and click it into place.
Replacing the activated carbon filter
If your vacuum cleaner is equipped with an activated
carbon filter, this must be replaced every six months.
Open the dust bag compartment lid
Unlock the filter holder by pushing the locking tab in
the direction of the arrow
Remove the activated carbon filter.
Fit a new activated carbon filter.
Insert the filter holder back into the vacuum cleaner
and click it into place.
en
29