Compaq PRESARIO 5000 SERIES Maintenance And Service Manual page 190

Return to top
Hard Drive Error Codes
Error Code: Description:
1700-xx Hard drive ID types test failed
1701-xx Hard drive format test failed
1702-xx Hard drive read test failed
1703-xx Hard drive write/ read/ compare test failed
1704-xx Hard drive random seek test failed
1705-xx Hard drive controller test failed
1706-xx Hard drive ready test failed
1707-xx Hard drive recalibration test failed
1708-xx Hard drive format bad track test failed
1709-xx Hard drive reset controller test failed
1710-xx Hard drive park head test failed
1714-xx Hard drive file write test failed
1715-xx Hard drive head select test failed
1716-xx Hard drive conditional format test failed
1717-xx Hard drive ECC (Error Correction Code) test
failed
1719-xx Hard drive power mode test failed
1730-xx Fixed Disk 0 does not support DMA mode
1731-xx Fixed Disk 1 does not support DMA mode
1740-xx Fixed Disk 0 failed Set Block Mode
command
1741-xx Fixed Disk 1 failed Set Block Mode
command
1750-xx Fixed Disk 0 failed Identity command
1751-xx Fixed Disk 1 failed Identity command
1760-xx Fixed Disk 0 does not support Block Mode
1761-xx Fixed Disk 1 does not support Block Mode
1790-xx Disk 0 Configuration Error
Recommended Action:
The following steps apply to error
codes 1700-xx through 1799-xx:
Run Setup and verify drive
1.
type.
Replace the hard drive signal
2.
and power cables and retest.
Replace the hard drive and
3.
retest.
Replace the system board
4.
and retest.