VTech VC7151 User Manual page 32

Edit numbers for remote calls:
You can add, edit, or delete a telephone number for remote calls.
MODE
1. Press
telephone base when idle.
Scroll to choose Remote, and then
2.
press OPTIONS.
SELECT
3. Press
number.
Scroll to the desired slots (1, 2, or 3),
4.
and then press SELECT.
5. Use the dialing keys to enter the
number.
6. Press SAVE
Set time delay for remote calls:
You can choose to set an exit or entrance
delay time for the remote calls, so that
when a sensor is triggered when you exit
or enter your home within the delay time,
you will not receive the unnecessary
remote call.
For example, when you are about to leave
home, you can set the exit delay time to
5 minutes. Once the delay is set, you will
not receive a remote call even when you
open the door within those five minutes.
As for the entrance delay time, if you set it
to 1 minute, you will receive the remote call a minute after opening
the door as you come home, unless you press
choose Local mode, or press DISARM on the handset or telephone
base within that minute.
If you want to be notified immediately whenever a door is opened,
we recommend you to set it as 0 minutes.
on the handset or
to select Set tel
to save.
MODE
28
and then