HP 260 G2 DM Hardware Reference Manual page 17

10. Plug the combined power and data cable into the hard drive (1). Align the guide screws with the slots on
the chassis drive cage, press the hard drive down into the bay, and then slide the hard drive forward (2)
until it stops and locks into place.
11. Replace the access panel.
12. If the computer was on a stand, replace the stand.
13. Reconnect the power cord and any external devices, and then turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
Removing and replacing a hard drive 11