Casio FX-9750G plus User Manual page 404

20- 11
376
Downloaded from www.Manualslib.com
Command Reference
Parameters:
• control variable name: A to Z
• starting value: value or expression that produces a value (i.e. sin
• ending value: value or expression that produces a value (i.e. sin
Description:
1. When the starting value of the control variable is greater than the ending value,
execution continues from the statement following Next, without executing the
statements between For and Next.
2. A For-statement must always have a corresponding Next-statement, and the
Next-statement must always come after its corresponding For-statement.
3. The Next-statement defines the end of the loop created by For~Next, and so it
must always be included. Failure to do so results in an error.
Example: For 1 → A To 10_
A × 3 → B_
B ^
Next
For~To~Step~Next
Function: This command repeats everything between the For-statement and the
Next-statement. The starting value is assigned to the control variable with the first
execution, and the value of the control variable is changed according to the step
value with each execution. Execution continues until the value of the control
variable exceeds the ending value.
Syntax:
For <starting value> → <control variable name> To <ending value> Step <step value>
Next
Parameters:
• control variable name: A to Z
• starting value: value or expression that produces a value (i.e. sin
• ending value: value or expression that produces a value (i.e. sin
• step value: numeric value (omitting this value sets the step to 1)
Description:
1. This command is basically identical to For~To~Next. The only difference is that
you can specify the step.
2. Omitting the step value automatically sets the step to 1.
manuals search engine
x
, A, etc.)
x
, A, etc.)
_
:
^
x
, A, etc.)
x
, A, etc.)