12 - 2
P.139
P.229
178
Downloaded from
www.Manualslib.com
Using Graph-to-Table
6. Pressing A causes the highlighting to
appear in the table. You can then use
the cursor keys to move the highlighting
around the table and check its values.
Press A again to return the pointer to
the graph screen.
u u u u u To save numeric table values in a list file
You can save columns of values into list files. Up to six values can be stored in a
list file.
• The highlighting can be located in any row of the column whose data you want
to save in the list.
Example
To save the
1. Starting from the screen that appears in step 6 of the previous example, press
K. The following function menu appears.
• {CHNG} ... {changes the active screen (between left and right)}
• {LMEM} ... {saves table column to list file}
• {PICT} ... {saves graph data to graph memory}
2. Press 2 (LMEM).
3. Press 1 (List1) to store the data in the
• Table data uses the same memory as TABLE menu table data.
• Always be sure to store table data into a list.
• Any of the following operations causes table data to be deleted.
— Editing expression data
— Changing set up screen or View Window settings
— Changing to a different mode
• If you save data into a list that already contains data, the previous data is
replaced with the new data.
• For details on recalling numeric data saved in a list file, see "17. List Function".
manuals search engine
x
-coordinate data of the previous example in List 1.
x
-coordinate column into List 1.