Vimar 21553.2 Instruction Manual page 62

Video door entry system
Icon signaling the title bar.
Next to the title bar can be found on the right, up to three icons of signal:
- "Ringtone disabled"
- "User Away";
- "Open door".
Configuration of the functions associated with icons (INTERCOM CALLS).
The icons on the multimedia video touch screen can be configured for sending different specific commands on the bus.
They can be configured, for instance, for sending FUNCTION F1/F2 commands, the self-start command on a specific
panel, the command for making an intercom call, etc...
For example:
1. Set the push-button for intercom calls: on the audio/video door entry unit that you want to call, press any
button (except the hands-free answer button - preferably the LOCK or AUXILIARY SERVICE button) to send the
code of the called device to the calling video door entry unit. The video door entry unit responds to program-
ming with an audible warning.
2. Set the button for sending the FUNCTION F1(F2): using a device that is able to do it (for instance audio/
video door entry units already configured, panels, USB 02024 interface for PC "SaveProg" software), send the
FUNCTION F1(F2) command on the bus. The video door entry unit responds to programming with an audible
warning.
3. Set the button as self-start on a specific panel: from the panel on which you want the self-start with the
button being configured, send a call with the button corresponding to the video door entry unit; this responds
to programming with an audible warning.
4. Other functions: they can be programmed entirely in a similar way to the preceding ones.
60