Table of Contents
Advertisement
Video door entry system
Secondary numerical coding of the video door entry unit.
Programming the secondary identification code is only required when you want to have more than one video door
entry unit ring at the same time with the same push-button or call code.
The video door entry units that must ring at the same time are associated with the same group; The "master" video
door entry unit is programmed first by means of the numerical coding procedure described above (see under the
heading NUMERICAL CODING OF THE VIDEO DOOR ENTRY UNIT), while the additional group video door entry
units are programmed with the secondary identification code.
A maximum of four video door entry units can be associated with the same group, without the need for the inter-
face USB with PC and "SaveProg" software.
In the case of video door entry units it is necessary to add an additional power supply art. 6923 for each
additional monitor after the second one (that is starting from the third one).
By using the USB 02024 interface with PC and "SaveProg" software, it is possible to program the activation of the
bell of all the video door entry units without all the monitors coming on at the same time; then only the monitor of
the video door entry unit being answered from is activated, with the self-start push button, in such a way as not
to have to use any additional power supplies.
If you want to program the video door entry unit as a secondary one of a certain master, the procedure
is the following:
• In the main window touch the
• Touch the
• On the panel, press the corresponding button or key in the number of the master; the secondary one will auto-
matically acquire the master's id (for more details please see the technical documentation).
Alternatively, you can set the secondary identification via the USB interface 02024 using a PC and the "SaveProg"
software.
This type of approach enables associating the same group with up to 8 devices (video/audio door entry units).
24
icon and subsequently the
icon; the secondary numerical coding is then completed.
icon.
Advertisement
Table of Contents
