Vimar 21553.2 Instruction Manual page 42

Video door entry system
Landing calls, audio/video.
If there is a speech unit on the landing with the audio/video function (art. 20577/14577 with 20560/14560 or
20565/14565), the video door entry unit must be configured for being able to receive the audio communication
from the call button 20577/14577 and activation of the video camera from the landing.
To activate the video camera on the landing it is necessary to install the audio/video interface for video
cameras art. 69AM.
To associate the landing call button with the video door entry unit carry out the following procedure:
1. Code the landing call button (see the instructions sheet of art. 20577 or 14577)
2. Associate the video door entry unit/audio door entry unit with the landing call button 20577/14577 using
the PC and the USB 02024 interface with "SaveProg" software (see the chapter "CONFIGURATION OF THE
OPTIONAL FUNCTIONS OF THE VIDEO ENTRYPHONE" - Association of the landing calls) of this manual.
NOTE: To associate the video/audio door entry unit with the landing call of the audio/video type it is necessary to
keep the call type selection jumper (set on the removable terminal side of 20577/14577) in position "V".
IMPORTANT: The video/audio door entry unit can be associated with up to a maximum of 4 different
landing call buttons; the identification code of the call button belongs to the class of the monitors (numerical
code from 1 to 200).
The local lock activation time (the default setting is equal to 1 s) can be modified only with the PC and the serial
USB 02024 interface and the "SaveProg" software (selection interval from 0 to 250 s).
Vice versa, the response time (30 s), conversation time (300 s) and self-start time (30 s) are fixed and are not
modifiable.
Examples of different types of landing call:
CE
Flat 2
Appartamento 2
CV CV
2
20557/14557 20557/14557
20577/14577
Flat 1
Appartamento 1
Figure 27 - Landing calls, audio only
40
2
2
K
2
2
2
2
SP
AL
CP
2
SE
2
2
2
2
2
AS
2 2
TA TA
2 2
SE SE
AL
~
AS
~
~