Table of Contents
Advertisement
Video door entry system
2. Use of the interface 69AM for audio/video landing calls.
If there is a landing audio/video speech unit (push-button 20577/14577 and video cameras 20560, 20565, 14560,
14565), the audio/video interface can be used instead without numerical coding of the secondary panel as instead
was necessary in the preceding case (in this way an ID reserved for the class of panels is not pointlessly occupied).
WARNING: The association between landing call button (20577 or 14577) and the video/audio door entry
unit to be called can be done via advanced programming as the association of the video camera with the
audio/video interface for video cameras (69AM); then it is necessary to use the PC and the USB 02024
interface with "SaveProg" software (see the related technical documentation).
On sending the audio/video call by pressing the landing nameplate button (art. 20577 or 14577), the interface will
enable the video camera associated with it.
With this type of configuration it is possible to connect up to 4 video cameras for the 4 possible landing call
buttons.
NOTE:
It is possible to self-start the video camera associated with the landing call button (and if necessary in sequence on
the following ones) by sending an intercom call toward the latter; it is therefore necessary to configure the video
door entry unit so it can send this command (see the chapter "PUSH-BUTTON CONFIGURATION - Intercom calls").
Repeatedly sending the command allows "scrolling" through all the video cameras connected to the video inter-
face 69AM.
44
Advertisement
Table of Contents
