Vimar 21553.2 Instruction Manual page 17

Vimar Web Server IP network
The network parameters can be assigned automatically by a router enabled for the DHCP function or by manually
entering the addresses to be assigned.
If you choose not to use the DHCP function, for it to work properly with the external Internet network it is manda-
tory to set, in addition to the device's static IP address, the network mask and the gateway/router IP address, as
well as a DNS server to refer to for the connection (if you do not have a specific IP address, enter 8.8.8.8 or the
same IP address as the gateway/router).
Once you have finished filling out all the fields, confirm by touching the
The
the mode and the addresses used.
The
to disable and enable the interface.
The Online mode On/Off button identifies, in "Online" mode, the capability of the video entryphone to connect
with the external Internet network.
If this function is disabled, the video entryphone hides the icons in the main menu that refer to functions that
involve downloading content from the Internet (for example, News and Weather); the video entryphone also stops
the daily background searches for software updates.
• Vimar Web Server Configuration
With the
multimedia video touch screen; two pop-ups in succession and an IP address displayed on the page confirm the
two devices have been successfully paired.
button lets you, at any time, know the actual connection to the local network,
button should only be used in cases of network failure or in particular configurations
icon you make the search and automatically pair the Web Server 01945-01946 with the
button.
15