Safety Instructions - AOpen MP945-VDR User Manual

Safety Instructions

1. Please read these safety instructions carefully.
2. Please keep this User's Manual for later reference.
3. Please disconnect this equipment from connecter before cleaning. Don't use liquid
or prayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage,
frequency, and ampere.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening; this could cause fi re or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be opened by
qualifi ed service personnel.
8. If one of the following situations arises, get the equipment checked by a service personnel :
a. Liquid has penetrated into the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not work well or you can not get it work according to user's manual.
d. The equipment has dropped and damaged.
e. If the equipment has obvious sign of breakage.
9. Ambient operation temperature: less than 40 degrees C.
10. Caution on use of battery: Use the battery recommended by the manufacturer or the same
type of battery installed by the manufacturer. If incorrect battery is used, it may cause
explosion or fi re hazard. Recycle or discard used batteries according the manufacturer's
instruction or your local authority.
vi
11. Information of power supply manufacturers:
Model Manufacturer
ADP-90SB BB Delta
12. Safety caution concerning laser products:
DVD-ROM/CD-RW combo drive is "Class I Laser Product" This equipment, built with
DVD and/or CD disc drives using laser beam to read or write data on optical discs, is
classifi ed as "Class 1 laser product". While the laser optical drive is reading data from or
writing data to an optical disc, do not force open the disc drive door. Press the Eject button
to retrieve the optical disc only after the in-use indicator goes off.
vii