3.4.3. Analog video connection
Connect the [DVI OUT / VGA OUT] connector of DISPLAY 1 to the [VGA IN] connector of DISPLAY 2.
DISPLAY 1
DISPLAY 2
PC
[VGA]
[VGA IN]
[DVI/VGA OUT]
[VGA IN]
3.4.4. IR daisy-chain Connection
Connect [IR Sensor Cable] to DISPLAY 1, and connect the [IR OUT] connector of DISPLAY 1 to the [IR IN]
connector of DISPLAY 2.
DISPLAY 1
DISPLAY 2
IR Sensor Cable
[IR OUT]
[IR IN]
3.5.
IR connection
External
IR Receiver
[IR IN]
NOTE: This display's remote control sensor will stop working if the
[IR
IN] is connected.
14