Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (page 23)
To return to TV
PC menu setting (changed as desired)
To make settings
Menu
Item
Advanced
PC
Settings
PC
Setup
18
Select the external input
Select "PC"
(Corresponds to the
colour bar on screen)
"How to Use Menu Functions"
R-Gain
Adjusts the white balance for red areas
G-Gain
Adjusts the white balance for green areas
B-Gain
Adjusts the white balance for blue areas
Gamma
(2.0 / 2.2 / 2.5)
Reset to
Press the OK button to reset to the default setting.
Default
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
SVGA (800 × 600 pixels), XGA (1,024 × 768 pixels),
Input
WXGA (1,366 × 768 pixels)
Resolution
Options change depending on signals
If "H-freq." or "V-freq." is shown in red, the signals may not be
supported.
Clock
Set to the minimum level if noise occurs
Adjusts horizontal position
H-pos
Adjusts vertical position
V-pos
Eliminates flicker and distortion
Clock
Adjust after Clock adjustment
Phase
Set to the minimum level if noise occurs
Reset to
Press the OK button to reset to the default setting.
Default
Blue
Red
to
(page 13)
Adjustment / Configurations (options)
Corresponding signals
(page 27)