Important Installation Notices - Panasonic Viera TX-26LE8A Operating Instructions Manual

Important Installation Notices

■ Install TV on a stable surface
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to
falling.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of the supporting furniture.
Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable support.
Not standing the televisions on cloth or other materials placed between the television and supporting
furniture.
Educating children about the dangers of climbing on furniture to reach the television or its controls.
■ When cleaning the TV, remove the mains plug
Cleaning an energized TV may cause electrical shock.
■ When the TV is not going to be used for a long period of time, remove the
mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
■ Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the
internal circuitry.
■ Do not expose your ears to excessive volume from the headphones
Irreversible damage can be caused.
■ Auto power standby function
If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV
will automatically go to standby mode.
Do not display a still picture for a long time
This causes the image to remain on the screen ("image retention").
This is not considered a malfunction and is not covered by the warranty.
Typical still images
Programme number and other logos
Image displayed in "4:3" mode
Video game
Computer image
To prevent image retention, contrast is lowered automatically after a few
minutes if no signals are sent or no operations are performed.
3