Hdmi Connection; Pc Connection - Panasonic Viera TX-26LE8A Operating Instructions Manual

HDMI Connection

HDMI (High-Definition Multimedia Interface) allows you to enjoy high-definition digital images and high
quality sound by connecting the TV and the equipment.
HDMI-compatible equipment (*1) with a HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using a HDMI compliant (fully wired) cable. About
connections see "External Equipment" on page 23.
Note
HDMI is the world's first complete digital consumer AV interface complying with a non-compression
standard.
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI
adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal
(HDMI1: use AUDIO IN terminals).
Audio setting can be made on the "HDMI1 Input" menu screen.
Applicable audio signal sampling frequencies (2ch L.PCM) : 48 kHz, 44.1 kHz, 32 kHz.
HDMI2 terminal is for digital audio signal only.
Use with a PC is not assumed.
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
These HDMI connectors are "type A".
An equipment having no digital output terminal may be connected to the input terminal of either
"Component", "S-VIDEO", or "Video" to receive analogue signals.
The HDMI input terminal can be used with only following image signals : 480i, 480p, 576i, 576p, 720p
and 1080i. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see page 27.

PC connection

A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
Some PC models cannot be connected to this TV.
When using PC, set the colour display quality of PC to the highest position.
For details of the applicable PC signals, see below.
Max. display resolution
Aspect
D-sub 15-pin connector signal
5 4 3 2 1
10 9 8 7
15 14 13 12 1 1
Pin No. Signal Name
NC (not connected)
GND (Ground)
26
(*1) : The HDMI logo is displayed on an HDMI-compliant equipment.
(*2) : Enquire at your local digital equipment retailer shop.
4:3 1,024 x 768 pixels
16:9 1,366 x 768 pixels
6
Pin No.
R
G
B
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No. Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)