Control With Viera Link; Input Signal That Can Be Displayed - Panasonic Viera TX-26LE8A Operating Instructions Manual

Control with VIERA Link

HDMI connections to some Panasonic equipment allow you to enjoy the easy playback.
Setup the equipment to enable this function. Read the manual of the equipment.
Switch the TV until on again with the equipment on when connection or setup is changed.
This function may not work normally depending on the equipment condition.
The equipment can be operated by TV's remote control with this function on even if TV is in Standby
mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when the input mode is switched.
Easy playback is also available by using the remote control from Amplifier or Player theatre.
Read the manual of the equipment.

Input signal that can be displayed

Mark : Applicable input signal for Component (Y, P
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
PC (D-sub 15P)
Signal name
640 × 480 @60 Hz
800 × 600 @60 Hz
852 × 480 @60 Hz
1,024 × 768 @60 Hz
1,366 × 768 @60 Hz
Note
Signals other than the above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Applicable input signal for PC is basically compatible to VESA standard timing.
PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with
sufficient clarity.
Horizontal frequency (kHz)
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
Horizontal frequency (kHz)
/C , P /C ) and HDMI
B B R R
Vertical frequency (Hz) Component
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
31.47
37.88
31.47
48.36
48.39
HDMI
*
*
*
*
*
*
*
*
Vertical frequency (Hz)
59.94
60.32
59.94
60.00
60.04
*
*
*
*
*
*
*
*
27