Epson powerlite 740c Quick Setup Manual page 4

Quick Setup
Epson PowerLite 740c
T
roubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on
your notebook, check the following:
Make sure the Power light on the projector is green
and not flashing, and the lens cover is off.
Press the Source Search button on the projector
to select the computer as the image source.
If you're using a Windows
keyboard that lets you display on an external monitor. It may be
labelled CRT/LCD or have an icon such as
hold down the Fn key while pressing it. Allow a few seconds for
the projector to sync up after changing the setting.
If the projector and notebook
don't display the same image...
If your image displays either on the projector or notebook, but not on
both, check the following:
Windows
Try using the CRT/LCD or
this key lets you toggle between the LCD screen and the projector,
or display on both at the same time.
If that doesn't work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1. From the Windows Control Panel, open the Display utility.
2. In the Display Properties dialog box, click the
Settings tab, then click Advanced.
3. The method for adjusting the setting varies;
you may have to click a Monitor tab, then
make sure the external Monitor port is set
as your primary display and/or enabled.
See your notebook's manual or online help
for details.
®
Macintosh OS X
1. From the Apple
Preferences, then select Displays.
2. Select the VGA Display or Color LCD
dialog box.
3. Click the Arrangement (or Arrange) tab
and click Mirror Displays.
Macintosh OS 9.x or earlier
1. From the Apple menu, select Control
Panels, then click Monitors or
Monitors and Sound.
2. Click the Arrange icon.
3. Drag one monitor icon
on top of the other.
If the Arrange option isn't available,
click the Monitor icon and select a
Simulscan resolution.
®
notebook, press the function key on your
key as described above. On most systems,
®
menu, select System
. You may have to
CPD-18611