Fritz! 1750E Configuration And Operation page 8

Button and LEDs
LEDs
LED
Signal
strength
Power
WLAN
LAN
All
Condition Meaning
flashing
•
•
on The more LEDs are lit up, the stronger the
connection with the wireless access point
In the "LAN Bridge" mode: signal strength
of the connection with the first registered
wireless LAN device
flashing
•
•
on FRITZ!WLAN Repeater is ready for opera-
tion
flashing
•
•
•
flashing WPS aborted. More than two WLAN devic-
rapidly es are performing WPS at the same time.
Restart WPS.
on Wireless LAN is enabled
on A network connection has been estab-
lished to a connected network device
flashing Loading factory settings
8
Searching for wireless access point
No connection with the wireless
access point
FRITZ!WLAN Repeater starts
Updating the firmware of the
FRITZ!WLAN Repeater
FRITZ!WLAN Repeater adopts wireless
LAN settings
Switching wireless radio network on or
off
Performing WPS