Fritz! 1750E Configuration And Operation page 31

Cannot Access Devices in the Network
Set up the devices as directed in the section
Address Automatically
Cause
The devices are not bound to TCP/IP.
Help
Check the network connection of the network adapter in the
device in question. See the documentation of your operating
system for more information.
Obtaining an IP Address Automatically
This section describes how to set automatic IP address as-
signment in the computers in the network.
Obtaining an IP Address Automatically in Windows
1.
2.
3.
4.
5.
In Windows 7 and Vista click "Start".
In Windows 8 and 8.1, press the Windows key and the Q
key at the same time.
In Windows 7 and Vista, the Start menu with the
"Search" field appears. In Windows 8 and 8.1 the
"Search" menu for apps appears.
Enter "ncpa.cpl" in the search field and press Enter.
Entering "ncpa.cpl" in Windows 8
Click the network connection of the computer with the
right mouse button and select "Properties".
Under "This connection uses the following items", select
"Internet Protocol Version 4 (TCP/IPv4)".
Click the "Properties" button.
31
from page 31.
Obtaining an IP