Fig. 5.3.1.2. - Cursor Selection Menu; Fig. 5.3.1.3. - Time Periods Table - ETC M570 series User Manual

M570 series oscilloscope with rollmode
Delete last cursor – Deletes the last added cursor
Delete all cursors – Deletes all waveform cursors
Display times – Displays time periods between cursors
Because the string of the displayed time could be too long to display, if you
locate the mouse over the time string, the full information will be displayed. The time
periods are displayed including information of the relation of the cursors. It is the
difference between position of the cursor from the upper row and the cursor from left
column. If the time period value is negative, the cursor from left column points to
later time than the cursor from upper row.
Click "Export to clipboard" to save the time periods information to the
clipboard. The data consists of the pair of cursor's names followed by data period
information (from position of the second cursor is subtracted the position of the first
one). The example of the clipboard export follows:
TimeSynchro-C1 = 63ms 29us 999ns
TimeSynchro-C2 = 126ms 779us 999ns
TimeSynchro-C3 = 3s 433ms 909us 999ns
TimeSynchro-C4 = 3s 592ms 529us 999ns
TimeSynchro-C5 = 5s 548ms 519us 999ns
Fig. 5.3.1.2. – Cursor selection menu
Fig. 5.3.1.3. – Time periods table
User's Guide
- 26 -