Waveform Screens; Fig. 5.1.1. - Data File Control Elements; Fig. 5.2.1. - Waveform Screens; Fig. 5.2.2. - File Screen - ETC M570 series User Manual

M570 series oscilloscope with rollmode
The file name has to be inserted into the upper edit box.
The button opens standard operating system dialog, where you can select
the target file.
Click „Open" to load data.
The length of the file is indicated on the right of the "Size" label.
The "progress" bar located on the right bottom side of the screen indicates the
state of the load operation.

5.2. Waveform screens

The waveform screens are shown on the fig. 5.2.1. They are used to display
the whole data stored in the data file, part of data stored in internal buffer of the
computer and part of data used for detailed measurements.
The "file screen" is located on the bottom side of the screens. It shows whole
data stored in the data file (Fig.5.2.2). The violet color bar marks the data area cached
in the internal waveform buffer of the computer. By moving this bar it is possible to
change the content of the internal buffer. To move this bar click on screen on left or
right side of it, click on arrows or simply drag it to desired position.
Fig. 5.1.1. – Data file control elements
Fig. 5.2.1. – Waveform screens
Fig. 5.2.2. – File screen
User's Guide
- 23 -