Signal Source Controls; Channel Information; Main Menu; Fig. 4.13.1. - Signal Source Controls - ETC M570 series User Manual

M570 series oscilloscope with rollmode

4.13. Signal source controls

The signal source controls are located in the right of the main window.
Channel A controls are located in the left, channel B controls are located in the
right.
"1:1", "1:10", "1:100" or "1:1000" – probe attenuation ratio
WARNING: Selection of improper probe attenuation may result in wrong
information about voltages.
Click to select coupling. Click

4.14. Channel information

The channel information are displayed in the top of the main window.
Channel A information are located in the left, channel B information in the
right.
Following information are displayed:
- information about coupling and probe attenuation ratio
- range
WARNING: If the improper probe attenuation is set, the information will be
inaccurate.
„U(t)" – the last measured value
- trigger threshold voltage

4.15. Main menu

The main menu is located in the top of the main window. Following menu
items are available:
File | Viewer – Opens the data viewer.
Fig. 4.13.1. – Signal source controls
Fig. 4.14.1. – Channel information
to ground input.
User's Guide
- 19 -