Engine Installation - Marine 10 M Owner's Manual

It may take several seconds for the engine and propeller to stop turning. The boat
may continue to coast, causing injury to anyone in its path.

Engine Installation

PERSONAL INJURY HAZARD – Failure to securely install and maintain outboard engine
mounting may cause engine to eject during operation, causing death, serious injury or
property damage.
Engine may be installed directly onto transom or onto a mounting bracket. See
engine operator´s manual and boat manufacturer´s instructions.
Ensure engine is secure before each use.
Alarms (Do Not Ignore Any Alarm)
If engine overheating leaves you stranded, shut off engine and allow it to cool. After
engine has cooled, restart and operate at low idle speed until it starts to overheat
again. Repeat process if necessary.
Some outboard engines have alarms indicating overheating, low oil level, oil injection
pump failure or water in fuel filter. Turn off engine and correct problem before
operating. See engine operator´s manual for troubleshooting instructions.
WARNING!
NOTICE!
39
SYSTEMS