Stationary 2D Code Reader PD50
System Configuration
Overview
USB1.1
AETOOL
USB:
Easy connection to PC (PDTOOL) dedicated port with
USB1.1 using standard cable.
LVDS:
Low Voltage Differential Signal method.
Attachment of finder unit screen is possible for checking
inspection results. Settings can also be altered using the
switches on the front panel.
RS232C: Can be connected to other Panasonic display devices and
PCs and inspection results can be easily monitored and
settings easily changed.
I/O:
Connection to PLC or sensor. The PLC has functions
installed to interpret inspection results as a trigger signal
for
the sensor, as a switch for the product type or as teaching
input.
ANE2803
RS232C Cable
Operation Unit Cable
Types of Main Units
30 x 25
25 x 20
20 x 16
15 x 12
10 x 08
05 x 04
02 x 1.6
Installation
15
25
45
60
distance
8
ANE2813
ANE2823
RS232C +
Operation Unit Cable
80
105
55
LVDS
Operation/Finder Unit
RS232C
GT11
I/O
PLC
Unit: mm
Field of view
11/2005
The finder image shown here has
been reduced in resolution, so is
darker that the actual screen
image.
or
PC
or
Fiber Sensor