Preview : Advanced Settings - Reolink 4CH User Manual

Preview -> Advanced Setting
Advanced Settings: Adjust various camera
settings according to the environment where the
camera is installed.
• Anti-flicker: Use this feature if some
devices such as TV screens and
lights are flickering. For USA and
Canada, set this to 60Hz. For
Australia and the UK, set this to
50Hz. Outdoor mode is also
available.
• Exposure Mode: Select the
exposure level of the camera based
on pre-defined conditions. Select
Manual
to adjust shutter speed and gain
value of the camera manually.
• Contextual: Change the way the camera processes white balance to correct image
colors. Auto, Day,
Night or Manual (adjust the red and blue gain manually).
• Day/Night: Set the camera's color mode during different times of the day and night -
AGC(Auto set by
image sensor, Color (Always in Day mode), Black&White (Always in Night mode) or
CDS (Auto set by
light sensor).
• Backlight: Optimize brightness and contrast levels to compensate for differences
between dark and bright
objects using either BLC or WDR mode. This may improve image clarity in high contrast
situations but
should be tested at different times of the day and night to ensure there is no negative
effect.
• 3D-NR: 3D-Noise Ratio: if Enabled can decrease the noise of the image .
53