Reolink 4CH User Manual page 41

Device Setting -> Alarm -> Motion
41
Motion Detection - Schedule
Here you can set the schedule time 7
day 24 hours a week , red box means
when motion detect , it will alarm .
Action: The action you'd like the
NVR to take when motion occurs.
It's set in the same way as the
Action for any other event.
Audio Warning: The NVR will use
its internal buzzer to emit an alarm
tone. It sounds like an old
computer indicating an error, or a
large truck backing up.
Send Email: The NVR will send an
auto-email alert when the event
type you've selected occurs.
Click , you will see a grid of
white boxes.The outlined boxes mark the area
that is sensitive to motion. The area without the
white outlines is not sensitive to motion.
Click mouse to select and click again to de-
select .
Use the mouse to move the cursor around the
screen. By pressing select an area in the grid,
you can toggle motion detection ON or OFF in
that location.
Areas marked by white boxes will be sensitive
to motion, those not marked will not be.
Click and drag to select the area you want to select or de-select.
Click to clear up the motion Area .