Optional; Pedal-Operated Reverse Feed Device (Rf-1); Joining Foot For The Lockstitch Presser Foot; Auxiliary Thread Take-Up Kit - JUKI LZ-2280A Series Instruction Manual

6. OPTIONAL

6-1. Pedal-operated reverse feed device (RF-1)

GRF01001000

6-2. Joining foot for the lockstitch presser foot

❷

6-3. Auxiliary thread take-up kit

In the case the sewing machine is used for blind stitching and high-speed sewing processes, it is recommend-
ed to use the "auxiliary thread take-up kit" which helps stabilize the needle thread loops.
Thread breakage and stitch skipping can be prevented by stabilizing the needle thread loops.
* Auxiliary thread take-up kit Part No.: 40135178
ø10mm
❶
– 23 –
When you sew bulky materials, it is not easy to operate
the feed lever with your right hand to make the machine
perform reverse feed stitching.
In this case, attach the RF-1 device to your sewing
machine. This device allows you to reverse the sewing
directions as desired with your foot instead of your right
hand.
The figure on the left shows the device installed on the
sewing machine. When using the device, be sure to
replace the feed lever tension spring (B1646555000)
mounted on the machine with the spring (MAT80117S00)
supplied with the RF-1.
To use the presser foot for lockstitch, the "joining foot
for the lockstitch presser foot" has to be used.
❶
Joining foot for the lockstitch presser foot (Part
No.: D1551586000)
❷
Setscrew (Part No.: SS7090910SP)