Controlling A Tv - Onkyo HT-RC160 Instruction Manual

Controlling Other Components—Continued

Controlling a TV

By pressing the [TV] button that's been programmed
with the remote control code for TV, you can control
your TV with the following buttons.
For details on entering a remote control code for a differ-
ent component, see page 88.
The [TV] button is preprogrammed with the remote con-
trol code for controlling a TV that supports the
*1
. The TV must be able to receive remote con-
trol commands via
receiver via HDMI. If controlling your TV via
doesn't work very well, program your TV's remote con-
trol code into the [TV] button and use the TV remote
mode to control your TV.
Press [TV] button first
a
a
b
c
d
e
f
g
h
i
*1 The
supported by the AV receiver is the CEC
system control function of the HDMI standard.
90
and be connected to the AV
j
k
l
m
n
o
p
a ON/STANDBY, TV [9] buttons
Set the TV to On or Standby.
b TV VOL [q]/[w] button
Adjust the TV's volume.
c TV [INPUT] button
Selects the TV's external inputs.
d GUIDE button
Displays the program guide.
e Arrow [q]/[w]/[e]/[r] and ENTER buttons
Used to navigate menus and select items.
f SETUP button
Displays a menu.
g [1], [3], [2], [5], [4], [7], [6]
buttons*
Play, Pause, Stop, Rewind, Fast forward, Previous,
and Next.
These buttons works for combination devices.
h SEARCH, REPEAT, RANDOM, and PLAY
MODE buttons*
Function as colored buttons.
i Number buttons
Enter numbers. [0] button enters 11 on some com-
ponents. [+10] button* works as "--/---" button or
+10.
j DISPLAY button
Displays information.
k MUTING button
Mutes the TV.
l CH +/– button
Select channels on the TV.
m PREV CH button
Selects the previous or last channel.
n RETURN button
Exits the TV's setup menu.
o AUDIO button*
Selects foreign language soundtracks and audio for-
mats (e.g., Dolby Digital or DTS).
p CLR button
Cancels functions and clears entered numbers, or
enters 12.
Notes:
• With some components, certain buttons may not work
as expected, and some may not work at all.
• Buttons marked with an asterisk (*) are not supported
by the function.