Connecting A Tv Or Projector - Onkyo HT-RC160 Instruction Manual

Connecting the AV Receiver—Continued

Connecting a TV or Projector

See "Connecting Components with HDMI" on page 22 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your TV (
Step 2: Audio Connection
Choose an audio connection that matches your TV ( ,
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the
MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings.
• With connection
• To enjoy Dolby Digital and DTS, use connection
or and .)
a c
Connection
A
B
a
DIGITAL IN COAXIAL 2 (CBL/SAT)
b
c
c
b
A
Connect one or the other
Connection ,
b c
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver
Hint!
to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 28 and
30).
26
, you can listen to and record audio from your TV and listen in Zone 2.
a
AV receiver
COMPONENT VIDEO OUT
MONITOR OUT V
TV/TAPE IN L/R
DIGITAL IN OPTICAL 1 (GAME)
OPTICAL COAXIAL
OUT OUT
must be assigned (see page 41)
or ), and then make the connection.
A B
, or ), and then make the connection.
a b c
or . (To record or listen in Zone 2 as well, use
b c
Signal flow
⇒
⇒
⇐
⇐
⇐
L R
Y P P AUDIO
B R
OUT
COMPONENT VIDEO IN
TV, projector,
etc.
and
a
TV
Component video input
Composite video input
Analog audio L/R output
Digital coaxial output
Digital optical output
B B
a
VIDEO
IN
,
b