Installing The Battery; Installing The Belt Clip - Midland BR200 User Manual

INSTALLING THE BATTERY

Your radio operates with a Lithium-Ion battery� The belt clip should be
removed (see below) to make the installation and removal of the battery
easier�
To install the battery:
With the back of the radio facing you, install the battery by sliding the
pack along the back of the radio until the latch on the radio locks�
To remove the battery:
Press the release latch and slide the pack away from the radio�

INSTALLING THE BELT CLIP

With the back of the radio facing you,
align the BELT CLIP with the screw
holes on the radio� Attach the BELT
CLIP with the Phillips-Head screws
provided in the gift box�
*Be careful not to over tighten screws
to avoid damaging radio chassis*�
midlandusa.com
Model BR200
Page 9