6. Install the two screws to secure the VESA mount bracket to the computer.
Figure 15. Installing the VESA mount bracket screws
7. If the power adapter bracket is available, install the power adapter bracket. See "Replacing the power
adapter bracket" on page 85.
Replacing the power adapter bracket
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Note: The power adapter bracket is installed on the Video Electronics Standards Association (VESA) mount
bracket.
To replace the power adapter bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 9
Installing or replacing hardware
85