Table of Contents
Advertisement
About the ENERGY STAR Program (Only iR 3100CN)
R&TTE Directive
Super G3
Downloaded from ManualsPrinter.com Manuals
This copier model meets E
The International E
international program that promotes energy saving through the use of
computers and other office equipment. The program backs the
development and dissemination of products with functions that effectively
reduce energy consumption. It is an open system in which business
proprietors can participate voluntarily. The targeted products are office
equipment such as computers, displays, printers, facsimiles, and copiers.
Their standards and logos are uniform among participating nations.
This equipment (F143000) conforms with the essential requirements of EC
Directive 1999/5/EC.
We declare that this product conforms with the EMC requirements of EC Directive
1999/5/EC at nominal mains input 230 V, 50 Hz although the rated input of the
product is 220 V - 240 V, 50 Hz.
Use of shielded cable is necessary to comply with the technical requirements of
EMC Directive.
If you move to another EU country and are experiencing trouble please call the
Canon Help Desk.
Super G3 is a phrase used to describe the new generation of fax machines that
use ITU-T V.34 standard 33.6 Kbps* modems. Super G3 High Speed Fax
machines allow transmission times of approximately 3 seconds* per page which
results in reduced telephone line charges.
* Approximately 3 seconds per page fax transmission time based on CCITT/ITU-T
No.1 Chart, (JBIG, Standard Mode) at 33.6 Kbps modem speed. The Public
Switched Telephone Network (PSTN) currently supports 28.8 Kbps modem
speeds or slower, depending on telephone line conditions.
S
Program for energy efficiency.
NERGY
TAR
S
Office Equipment Program is an
NERGY
TAR
(For Europe Only)
Canon Inc./Canon Europa N. V.
ix
Advertisement
Table of Contents
