Table of Contents
Advertisement
4
Load the paper stack into the paper drawer.
Even out the edges of the paper stack. Load the paper stack
against the right wall of the paper drawer.
When loading paper into the paper drawer for the first time, set
the paper size dial to match the paper size being loaded. (See
"Adjusting a Paper Drawer to Hold a Different Paper Size," in
the Reference Guide.)
When loading paper into the paper drawer, make sure that the
paper size setting is the same size of the paper that is being
loaded.
2
IMPORTANT
• Paper which has been rolled or curled must be straightened out prior to use.
• Make sure that the height of the paper stack does not exceed the loading limit mark (
paper drawer.
• When loading 305 x 457 mm paper in the paper drawer, remove the left guide and insert it into the hole in the
front left side of paper drawer.
NOTE
• Each paper drawer holds approximately 550 sheets of paper (80 g/m
• For more information on the print direction of preprinted paper (paper which has logos or patterns already
printed on it), see "Relationship between Original Orientation and Preprinted Paper Output Chart," in the
Reference Guide.
5
Gently push the paper drawer back into the
machine until it clicks into place in the closed
position.
CAUTION
When returning the paper drawer to its original position,
be careful not to get your fingers caught, as this may
result in personal injury.
IMPORTANT
You will not be able to make copies or print if you load paper that
exceeds the loading limit, or if the paper drawer is not completely pushed into the machine. Always check that
the paper drawers are in place. If a paper drawer is overloaded, decrease the amount of paper so that it does
not exceed the loading limit.
2-4
Loading Paper
Downloaded from ManualsPrinter.com Manuals
) at the back of the
2
).
Advertisement
Table of Contents
