Panasonic KX-FP343HK Operating Instructions Manual page 48

8. Programmable Features
"60s": Maximum recording time is 60 seconds.
See page 35 for details.
Code #55 (KX-FP363 only): Greeting
message for mailbox 1
BOX1 GREETING
CHECK [±]
See page 39 for details.
Code #56 (KX-FP363 only): Greeting
message for mailbox 2
BOX2 GREETING
CHECK [±]
See page 39 for details.
Code #58: Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint or dark
writing, set this feature before starting
transmission or copying.
"NORMAL" (default): Used for normal writing.
"LIGHT": Used for faint writing.
"DARKER": Used for dark writing.
Code #60 (KX-FP363 only): Setting the
message transfer
MESSAGE TRANSFER
=OFF [±]
To transfer recorded incoming messages to
another telephone (page 40), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {A} or {B} repeatedly to select "ON".
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61 (KX-FP363 only): Checking,
recording or erasing the transfer greeting
message
TRNS-GREETING
CHECK [±]
See page 40 for details.
Code #67 (KX-FP363 only): Setting the
incoming message monitor
ICM MONITOR
=ON [±]
46
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
"ON" (default): You can monitor the incoming
message.
"OFF": Deactivates this feature.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON [±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
"ON" (default): To send a fax even if there is static
interference on the telephone line.
"OFF": Deactivates this feature.
L You cannot change the setting when received
documents are in memory.
Code #70 (KX-FP363 only): Calling your
pager
PAGER CALL
=OFF [±]
See page 41 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party's machine.
L If the ring back tone continues, the other
party's machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
"ON" (default): You will hear connecting tones.
"OFF": Deactivates this feature.
Code #77 (KX-FP363 only): Changing the
receiving mode in the auto answer setting
AUTO ANSWER
=TAD/FAX [±]
"TAD/FAX" (default): Telephone Answering
Device/Facsimile mode (page 29)
"FAX ONLY": Facsimile only mode (page 29)