Panasonic KX-FP343HK Operating Instructions Manual page 47

2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is ***9.
6. Press {SET}.
7. Press {MENU}.
Note:
L Do not enter "0000".
Code #42 (KX-FP363 only): Setting the
message alert
MESSAGE ALERT
=OFF [±]
To alert you when a new voice message is
recorded. The unit beeps slowly until you listen
to the recorded messages.
"ON": You will be alerted to new messages by a
beeping sound.
"OFF" (default): Deactivates this feature.
Code #43 (KX-FP363 only): Setting the
recording time alert
REC. TIME ALERT
=OFF [±]
To alert you with beeps when there is less than
60 seconds of remaining recording time. The
slow beeps will continue until you erase the
recorded messages (page 36, 40).
"ON": You will be alerted that you have reached
the recording time limit by a beeping sound.
"OFF" (default): Deactivates this feature.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON [±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
"ON" (default): You will be alerted to a reception
problem by a beeping sound.
"OFF": Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON [±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
8. Programmable Features
"ON" (default): You do not have to press
{FAX/START} for fax reception.
"OFF": You have to press {FAX/START} for fax
reception.
Code #47 (KX-FP363 only): Setting the fax
voice guidance
FAX GUIDANCE
=ON [±]
If you wish to hear voice guidance, activate this
feature.
"ON" (default): You will hear voice guidance.
"OFF": Deactivates this feature.
"ERROR":To hear the voice guidance only when
fax transmission/reception fails.
Code #51 (KX-FP363 only): Setting the
mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
1. Press {MENU}.
2. Press {#}, then {5}{1}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is "555".
4. Press {SET}.
5. Press {MENU}.
Code #52 (KX-FP363 only): Setting the
mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is "555".
4. Press {SET}.
5. Press {MENU}.
Code #54 (KX-FP363 only): Changing the
recording time for your TAD/FAX greeting
message
GREETING TIME
=16s [±]
"16s" (default): Maximum recording time is 16
seconds.
45