1. Introduction and Installation
1.6 Paper tray
Insert the tabs (1) on the paper tray (2) into the
slots on the back of the unit (3).
3
1.7 Recording paper
support
Insert the recording paper support (1) into the
slot to the right of the recording paper exit (2),
then into the left slot (3).
3
L The recording paper will be ejected from the
top of the unit after printing. The recording
paper support prevents the printed paper
from curling.
12
2
1
1
2
1.8 Recording paper
The unit can hold up to 50 sheets of 75 g/m
paper.
See the note for paper specifications (page 60).
1
Before inserting a stack of paper, fan the
paper to prevent paper jams.
2
Pull the tension plate forward (1) and hold
open while inserting the paper.
2
L The paper should not be over the tab
(2).
L If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Correct
2
Side to be printed
face down.
Recording
paper
entrance
1
Incorrect