Panasonic KX-FP343HK Operating Instructions Manual page 28

4. Fax
7
Press {STOP}.
4.4.3 Erasing a stored entry from
the broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
"<BROADCAST>".
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired entry you want to erase.
L To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L To erase other entries, repeat steps 5 to
7.
8
Press {STOP}.
4.4.4 Sending the same
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 23).
3
Press {BROADCAST}.
L The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
L After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L If you select "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages that
the unit can transmit will decrease.
L If the document exceeds the memory
capacity, sending will be cancelled.
L If one of the entries is busy or does not
answer, it will be skipped and redialled later
up to 5 times.
To send the same document to a one-time
group of entries
You can also select a one-time group of entries
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
26
2. Press {>}.
3. Press {A} or {B} repeatedly to display "<ONE
TIME BROAD>".
4. Press {SET} to start programming the
entries you want to transmit to.
5. Press {A} or {B} repeatedly to display the
desired entry.
6. Press {SET}.
L To program other entries, repeat steps 5
and 6 (up to 20 entries).
7. Press {SET} to start transmission to the
programmed entries.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
"BROADCASTING".
L The display will show "SEND
CANCELLED?".
2. Press {SET}.