Processor - HP 242 G1 Maintenance And Service Manual

Reverse this procedure to install the heat sink.

Processor

NOTE: The processor spare part kit includes replacement thermal material.
Description
Intel Core i5-3230M 2.60-GHz processor (SC turbo up to 3.20-GHz; 1600-MHz FSB, 3.0-MB L3
cache, 35 W)
Intel Core i3-3130M 2.60-GHz processor (1600-MHz FSB, 3.0-MB L3 cache, 35 W)
Intel Core i3-3120M 2.50-GHz processor (1600-MHz FSB, 3.0-MB L3 cache, 35 W)
Intel Core i3-2348M 2.30-GHz processor (1333-MHz FSB, 3.0-MB L3 cache, 35 W)
Intel Pentium 2020M 2.40-GHz processor (1600-MHz FSB, 2.0-MB L3 cache, 35 W)
Intel Celeron 1020M 2.10-GHz processor (1600-MHz FSB, 2.0-MB L3 cache, 35 W)
Before removing the processor, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. WLAN module (see
c. Solid-state drive (see
d. Memory module service cover (see
e. Optical drive (see
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 33) and then remove the following components:
Hard drive on page 34)
WLAN module on page
mSATA drive on page
Memory module on page
Optical drive on page
37)
39)
40)
42)
Spare part number
711903-002
713163-002
700627-002
713165-002
700628-002
727918-002