Table of Contents
Advertisement
KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 64
Features Summary
Advanced
How to set menu options
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
Programming table
Code
Setting the journal report to print
automatically
#22
AUTO JOURNAL
=ON
Sending document overseas
OVERSEAS MODE
=OFF
If you have difficulty sending an
#23
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
Sending a fax at a specific time
DELAYED SEND
=OFF
This feature allows you to take
advantage of low-cost calling hours
offered by your telephone
#25
company.
The setting can be reserved to
take place up to 24 hours in
advance.
Setting the Caller ID list to print
automatically
#26
AUTO CALL. LIST
=ON
64
features!
ADVANCED MODE
PRESS SET
Feature & Display
[±]
[±]
[±]
[±]
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
Note:
Step 3 may be slightly different depending on the
feature.
See page 61 for more details.
Settings
How the unit operates
"ON": The unit will print the journal
ON
report automatically after every 30
new fax communications (p. 31).
OFF
After transmission, this feature will
turn off automatically.
ON
This feature is not available for
broadcast transmission.
The calling charge may be higher.
OFF
To send a document:
1. Insert the document.
ON /
2. Follow steps 1 and 2 above.
fax no. /
3. Press
hh:mm
w
4. Press
5. Enter the fax number.
w
6. Press
7. Enter the transmission start time.
*
Press
w
8. Press
OFF
p
9. Press
To cancel after programming,
{
press
"ON": The unit will print the Caller
ON
ID list automatically after every 30
new calls (p. 25).
OFF
(The default setting is in bold type.)
+
-
or
to select "ON".
.
.
to select "AM" or "PM".
.
.
w
then
.
Advertisement
Table of Contents
