Table of Contents
Advertisement
Setup
(KX-FP121/KX-FM131 only)
TAD/FAX mode
(using the built-in answering device and receiving voice
and fax calls automatically)
When the TAD/FAX mode is set, the unit will work as a fax machine and/or answering device.
If a fax call is detected, the unit will automatically receive faxes.
If a voice call is detected, the answering device will play a greeting message and the caller can leave a voice
message.
You can use either pre-recorded greeting message (p. 93) or your own greeting message (p. 94).
Setting up the voice message and document reception
1
Select "TAD/FAX" in step 4 of feature setting #77
(p. 73).
2
If the AUTO ANSWER light is off, turn it on by
pressing
AUTO ANSWER
Display:
The unit will play the TAD/FAX greeting message
and the remaining time for recording incoming
messages will be displayed.
Example:
Note:
Each incoming message recording time can be set (p. 110).
For the total recording time, see "Memory Capacity" on page 131.
When the remaining time is low, erase unnecessary messages from memory (p. 98, 104).
While an incoming call is being recorded, you can monitor it through the speaker. If this feature is not
required, set to "OFF" (p. 111).
92
.
TAD/FAX MODE
TIME = 10m13s
AUTO ANSWER
TAD/FAX ON
ON
1
2
3
5
6
4
7
8
9
0
Advertisement
Table of Contents
