Table of Contents
Advertisement
Remote Operation
Erasing incoming messages from memory
Erasing a specific message
Press
4
while listening to the message you want to
erase.
A long beep and the voice guide will be heard.
The unit will then continue with the next message.
Erasing all messages
Press
5
to erase all messages.
A long beep and the voice guide will be heard.
Other remote operations
Monitoring the room
Press
6
to monitor the sound in the room where the
unit is installed.
You can monitor the room sound for about 30 seconds.
After 30 seconds, a beep sounds. To continue
monitoring, press
6
again within 10 seconds.
Recording a marker message
After playing back the recorded messages, you can leave
an additional message.
1. Wait for the voice guide to tell you that the remote
operation has ended.
2. Wait about 10 seconds for the voice guide to prompt
you to leave a message.
3. Leave a message after the beep.
Re-recording a greeting message
You can change the contents of the greeting message for
the TAD/FAX mode.
1. Press
7
to start recording.
A long beep will sound.
2. Speak clearly up to 16 seconds.
If you pause for over 2 seconds, 6 beeps will sound
and the recording will stop. Repeat from step 1
within 10 seconds.
3. When finished, press
The new greeting message will be played.
104
(KX-FP121/KX-FM131 only)
9
.
Voice guide example:
The message has been erased.
All messages have been erased.
All messages have been played.
Please leave your name and message
after the beep.
Advertisement
Table of Contents
