Fakir Harmony 550 Instruction Manual page 6

4. Parts of description:
8
4
1 Main housing (550W motor)
2 Start / stop control
3 Operating safety button
4 Stainless steel blender
5 Chopper cover
6 Chopper blade
7 Chopper bowl
8 Stainless steel mixer
9 Mixing cup
10 Wall mounting attachment
5. Using the appliance:
Using with the blender attachment:
• Clean the attachment before using for the first
time.
• Fit the attachment in to the main housing and
turn it to screw it fully into position.
• Place the attachment in the food to be beaten
and press the start / stop control and the
operating safety button at the same time. The
unit does not operate if the operating safety
button is not pressed.
• After the usage, unplug the appliance and turn
the attachment anticlockwise to unscrew it.
Using with the chopper attachment:
You could use this attachment to mince meat
or chop greens, vegetables, cheese, dried
fruits etc.
• Align the opening on the chopper blade with
the rod in the centre of the bowl and fit it in as
3
2
1
9
5
7
6
10
far as it will go.
• Add the food to be chopped in to the chopper.
• Fit the main housing into the chopper cover
by screwing on it.
• Plug in and press the start-stop control and
the operating safety button at the same time.
The unit does not operate if the operating
safety button is not pressed.
• Do not use hard foods such as coffee beans.
• When mincing meat ensure all bones or parts
have been removed.
• Allow cooked foods to cool down before
chopping.
Using the mixer attachment:
You could use this attachment to beat and
mix.
• Fit stainless steel mixer legs to the mount,
pushing them gently until fully in place.
• Fit into the main housing and turn assembly
to screw it in as far as it will go.
• Plug in after fitting the attachments to be used.
• Once connected, press the start-stop control
and the operating safety button at the same
time. The unit does not operate if the
operating safety button is not pressed.
• Make sure that the attachment can rotate
freely in the recipient.
• After finished the usage of the attachment,
unplug the appliance.
6. Cleaning and Maintenance:
• Ensure that the appliance is unplugged before
cleaning.
• Clean the main housing with a damp cloth and
dry thoroughly. Never immerse it to water for
cleaning.
Note: These times are guidelines and depend
on the quality of the food and fineness required.
Dispatch:
Carry the appliance in the original package or
a similar, well-padded package to prevent
damage to the appliance.
6