Changing The Password For The Administrator; Setting Up The Public User - Brother MFC-8370DN User Manual

Changing the password for
the administrator
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Set Password.
Press OK.
c
Enter the registered four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify: re-enter the
new password.
Press OK.
f
Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals

Setting up the public user

4
Public user mode restricts the functions that
are available for Public users. Public users do
not need to enter a password to access
features made available through this setting.
You can set up one Public user.
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Setup ID.
Press OK.
c
Enter the administrator password.
Press OK.
d
Press a or b to choose Public.
Press OK.
e
Press a or b to choose On or Off for
Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan,
USB Direct and PC Print.
When you have finished changing
settings press d or c to choose Exit
and press OK.
f
Press Stop/Exit.
Security features
4
29
4