Security Features; Secure Function Lock 2.0 (Mfc-8380Dn); Setting The Password For The Administrator - Brother MFC-8370DN User Manual

4

Security features

Secure Function Lock 2.0
(MFC-8380DN)
Secure Function Lock lets you restrict Public
access to the following machine functions:
1
PC Print
USB Direct Print
Copy
Fax Tx
Fax Rx
Scan
2
Page Limit
1
If you register the PC user login name by using Web
Based Management, you can restrict PC print
without the user entering a password. For more
detail, see Chapter 11 in the Network User's Guide
on the CD-ROM.
2
You can configure this feature from Web Based
Management. See Chapter 11 in the Network User's
Guide on the CD-ROM.
This feature also prevents users from
changing the Default settings of the machine
by limiting access to the Menu settings.
Before using the security features you must
first enter an administrator password.
Access to restricted operations can be
enabled by creating a restricted user.
Restricted users must enter a user password
to use the machine.
Make a careful note of your password. If you
forget it, you will have to reset the password
stored in the machine. For more information
about how to reset the password call your
Brother dealer for service.
28
Downloaded from ManualsPrinter.com Manuals
Note
• Secure Function Lock can be set manually
4
at the control panel or by using Web
Based Management. We recommend
using Web Based Management to
configure this feature. For more
information, see the Network User's
Guide on the CD-ROM.
• Only administrators can set limitations
and make changes for each user.
• When Secure Function Lock is on, you
can only use 1.Contrast or
7.Coverpg Setup in the Fax menu.
If Fax Tx is disabled, you cannot use any
function in the Fax menu.
• Polling Receive is enabled only when both
Fax Tx and Fax Rx are enabled.
Setting the password for the
administrator
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn Secure Function Lock on
or off. (See Setting up restricted users
on page 30 and Turning Secure Function
Lock on/off on page 30.)
a
Press Menu, 1, 8, 1.
b
Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c
Re-enter the password when the LCD
shows Verify:.
Press OK.
d
Press Stop/Exit.
4
4